茂港ISG80-250B二次循环泵安装于管路之中
5、维修方便。勿需拆卸管道,只要拆下泵盖螺母,取出电机及传动组件即可进行检修。
属立式结构,因其进出口在同一直线上,且进出口口径相同,仿似一段管道,可安装在管道的任何位置故取名为管道泵(又名增压泵)。 结构特点:为单吸单X离心泵,进出口相同并在同一直线上,和轴中心线成直交,为立式泵。
4、安装时在与密封相的表面应涂一层清洁的机械油,以便能顺利安装;5、安装静环压盖时,拧紧螺丝必须受力均匀,保证静环端面与轴心线的垂直要求;6、安装后用手推动动环,能使动环在轴上灵活,并有一定弹性;
茂港ISG80-250B二次循环泵安装于管路之中主要用途:
1、热水管道泵供输送清水及物理化学性质类似于清水的其他之用,热水管道泵适用于工业和城市给排水、高层建筑增压送水、园林喷灌、消防增压、远距离输送、暖通制冷循环、等冷暖水循环增压及设备配套,使用温度T<80℃。
茂港ISG80-250B二次循环泵安装于管路之中 广泛适用于:能源、冶金、化工、纺织、造纸,以及宾馆饭店等锅炉高水增压循环输送及城市采用暖循环用泵,IRG型使用温度T<120℃,珀GRG型使用温度T<240℃。
3、IHG型立式管道化工泵,供输送不含固体颗粒,具有腐蚀性,粘度类似于水的,适用于石油、化工、冶金、电力、造纸、食品制药使用温度为20℃~+120℃。
[Title] Main uses:
1. Hot water pipeline pumps are used for transporting fresh water and other liquids with similar physical and chemical properties. Hot water pipeline pumps are suitable for industrial and urban water supply and drainage, high-rise building divssurized water supply, garden sprinkler irrigation, fire fighting divssurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water cycle divssurization and equipment matching, using temperature T < 80 C.
[Title] Widely applicable to: energy, metallurgy, chemical industry, textile, paper, as well as hotels, hotels and other boilers high temperature hot water divssurized circulating transmission and urban use of heating system circulating pump, IRG type use temperature T < 120 C, PerGRG type use temperature T < 240 C.
3. IHG vertical pipeline chemical pump is used to transport liquid without solid particles, which is corrosive and has a viscosity similar to water. It is suitable for petroleum, chemical industry, metallurgy, electric power, paper, food and pharmaceuticals at 20 ~120 ~C.
7. After installation, the manual disc should be used to move the shaft and the rotating shaft without any sense of grity. 8. The equipment must be filled with medium before operation to divvent the seal from failing due to dry friction.
※责任意识:责任重于泰山,责任奠定诚信;责任是合作的前提,责任是伙伴双赢的基石。
下一篇:佛冈ISG150-160A管道泵循环泵即流量和扬程