河北会泉泵业有限公司
五金通钻石会员 第13年
已通过企业工商认证
公司服务热线
13582138818
循环增压泵A江阳循环增压泵A循环增压泵好
锅炉给水泵适于运送温度低于110°C的清水或物理化学性质类似于水的无腐蚀性的其他，广泛用于工矿企事业单位的锅炉给水和城市生活供水。DG型系列泵特别适用于锅炉给水，也可广泛使用于压力容器供水、热水循环、高层建筑给水、农田灌溉、消防增压、水力冲刷、食物、酿制、、化工、水产养殖、保护等职业。
GC型锅炉给X泵产品概述：GC型锅炉给X泵为单吸多X分段式离心泵，主要用于锅炉给水，所以又名锅炉给水泵。该系列多X泵适于输送温度低于110°C的清水或物理化学性质类似于水的无腐蚀性的其他，广泛用于工矿企事业单位的锅炉给水和城市生活供水。
GC型锅炉给X泵型号意义：
GC型锅炉给X泵产品特点：
1、水力模型X，效率高，性能范围广。
2、泵运行平稳，噪音低。\3、轴封采用软填料密封，可靠、结构简单，维修方便快捷。wjhuiquan7.18
GC型锅炉给X泵技术参数：
流量：5-55m3/h；
扬程：46-301m；
功率：3-75KW；
转速：2950r/min；
口径：φ40-φ100；
温度范围：≤80℃；
工作压力：≤2.7Mpa.
循环增压泵A江阳循环增压泵A循环增压泵好
循环增压泵A江阳循环增压泵A循环增压泵好
锅炉给水泵出现汽化的主要原因锅炉给水泵汽化的原因也包含水箱内的水位过低，那么这个时候就需要通过多X锅炉给水泵或许其他的设备给水箱进行注水。注水中的水温控制要根据现场的状况来确认，假如水温过高那么我们可以适当地注入一些冷水，假如水温过低也可以采纳比如热水的来缓解。
GC-type horizontal boiler water multi-stage pump structure description: GC-type boiler feed water pump for multi-stage, 11/2 GC-4GC four models of import and export in the incoming and out of the water section, are vertical upward, its head can be based on the need for use and increase or decrease the number of pump levels.Pump assembly is good or not, the performance has a great impact, especially the export of each impeller and the relative position of the guide wing import, each suction wheels spit outlet center must be aligned with the center of the guide wing, wherein a slight deviation will make the pump flow reduced, the head is reduced, the efficiency is poor, so after the overhaul assembly must pay attention, if there is a deviation must be adjusted.The main parts of the Gc-type multi-stage pump are the shaft, the bushing, the inlet section, the impeller, the guide wing, the sealing ring, the middle section, the water outlet segment, the balance ring, the balance plate, the tail cover.
The inlet section, the middle section, the water section and the tail cover are made of cast iron, forming the pump studio together.
The impeller is made of cast iron, with blades inside, liquid along the axial one-sided entry, due to the multi-stage pump impeller divssure varies, there must be axial force, this axial force by the balance plate to bear, impeller manufacturing by static balance test.
The shaft is made of high-quality carbon steel with a impeller in the middle and is secured to the shaft with keys, bushings and bushing nuts.One end of the shaft is mounted by the coupling component, which is directly connected to the motor.When viewed from the direction of rotation, the pump shaft rotates in the direction of the Sichuan page clock.
The sealing ring is made of cast iron, which divvents high-divssure water from leaking back into the water in the water pump, which is fixed in the chemical pump inlet and middle section, respectively, for the consumables, and replaces the spare parts ailable after wear.
The centrifugal pump balance ring is made of cast iron and is fixed to the water out section, which together with the balance plate to form a balancing device.
The balance plate is made of wear-resistant cast iron and is mounted on an axis, located between the water drain and the tail cover, balancing the axial force.
The chemical pump bushised is made of cast iron and is located in two filling chambers, where the centrifugal pump is used to secure the impeller and protect the pump shaft.For consumables, spare parts can be replaced after wear.
Bearings are single-line heartball bearings, lubricated with calcium-based butter.
填料起密封作用，防止空气和大量漏出。
填料密封由进水段和尾盖上的填料室，填料压盖，填料环及填料等组成，少量高压水流入填料室中起水封作用。填料的松紧程度必须适当，不可压的太紧，也不可太松，以能一滴一滴地渗出为准。如果填料太紧，轴套容易同时耗费功率。填料太松，由于流失要水泵效率。
GC型锅炉给X泵产品用途：
GC型锅炉给X泵特别适用于小型锅炉给水，也可广泛应用于压力容器供水、热水循环、高层建筑给水、农田灌溉、消防增压、水力冲洗、食品、酿造、、化工、水产养殖、保护、化工工艺流程及机床配套等各行业，作为给水排水的动力设备。
循环增压泵A江阳循环增压泵A循环增压泵好
循环增压泵A江阳循环增压泵A循环增压泵好
高能给水泵的振荡毛病来自多个方面，振荡性质可分为两大类：振荡和自激振荡。泵振荡的详细原因有如下数种：不平衡、轴承油膜失稳、流体激振(叶轮出口空隙不妥形成的流体激振、密封环磨损)失稳、平衡鼓(盘)缺点、轴向推力过大、动态碰摩、对轮不对中、轴承空隙过大、轴承松动或部件松动等。
我公司现产品有：井用潜水泵系列、高压喷泉泵，海水跋涉泵，热水潜水泵,池用热水潜水泵，长轴深井泵，海水泵，耐高压水泵，大流量水泵，高扬程潜水泵，矿用轴流泵，潜水轴流泵，多X潜水泵，高温污水泵，不锈钢潜水泵，不锈钢排污泵，砂浆泵，渣浆泵，单X离心泵，多X离心泵，双吸离心泵等，现在公司现已通过ISO2000认证。产品有自己的规划特征与风格，在机电作业具有较高的承诺和X度。特别是我们的潜水泵新产品在规划理念上更是与众不同，通过会泉泉泵业员工不断奋斗,现已了宽广新老客户的倾慕认可。现在我们在潜水泵作业了出色的声誉，产品引入天津水泵厂，天津潜水泵厂等多家潜水泵X出产厂家阅历，及我公司多年实践阅历。
