河北会泉泵业有限公司
五金通钻石会员 第13年
已通过企业工商认证
公司服务热线
13582138818
耐磨杂质泵A福清耐磨杂质泵原装
When mediating the impeller clearance, first stop the pump, loosen the bolts of the clamping bearing assembly, twist the nut on the bolt, make the bearing assembly move forward, and rotate the shaft with the hand rotation in the direction of the pump rotation until the impeller is rubbed against the front guard plate. How does the slurry pump impeller mediate? For metal lining pumps, the nut that is just tightened in front is loosened half a lap. The NUT in front of the adjustment bolt is then tightened so that the bearing assembly is moved back, At this time the impeller and the front guard gap in the 0.5-1mm, for the rubber lining pump by twisting the nut on the bolt, so that the bearing assembly first move forward, so that the impeller and the front sheath contact, in order to make the bearing assembly backward, so that the impeller and the rear sheath contact, measure the total moving distance of the bearing assembly, take this distance generally as the gap between the impeller and the front and rear sheath The position of the bearing component to ensure the correct clearance value of the impeller and the front and rear sheath. After adjustment, before starting again, it is necessary to re-check whether the impeller rotation is normal, bearing the formation of comdivssion bolts and adjustment bolts are tightened.
用途和产品：
AH、HH型泵为悬臂、离心渣浆泵。适用于冶金、矿山、电力、建材等工业部门输送强磨蚀、高浓度渣浆。该类型泵也可以多X串联使用。wjhuiquan4.15
AH、HH型泵的泵体具有可更换的耐磨金属内衬或橡胶内衬，叶轮采用耐磨金属或橡胶材料。HH型泵的内衬和叶轮仅采用耐磨金属。
AH、HH型泵的轴封可采用填料密封或离心式密封。泵的吐出口位置可根据需要按45度角间隔，八个不同的角度安装使用。
型号意义：
例如：10/8ST——AH（或HH）
10——泵口直径
8——泵吐出口直径
HH——高扬程渣浆泵
AH——渣浆泵
ST——托架型式
耐磨杂质泵A福清耐磨杂质泵原装
A pouring system was selected from the iron liquid into the direct channel and then through the transverse channel, and the casting of the castings was introduced by the lateral riser, and the divssure angle of the side riser was ≥10°, and the height was 300mm. Pouring temperature control in the 1370~1390℃, pouring attention to about 250kg, pouring after 48h after the box. Casting cleaning goes to the riser and after the seam for quenching + tempering. Analysis of fracture causes usually the main causes of casting fracture are the excess chemical composition of iron liquid and casting defects. Taking the sample of fracture guard plate for chemical composition test, the chemical composition qualified, wP≤0.06﹪, Ws≤0.06﹪,wsi≤1.0﹪, are within the qualified range, excluding the composition reason. Then the divliminary judgment of casting defects is the main cause of the fracture of the front guard plate. The internal gas shrinkage of castings seriously affects the intrinsic quality of castings, resulting in lower service life, for which we deeply yze the reasons. (1) The bottom of the outlet of the front guard plate belongs to the hot section, and the side riser is far from the bottom of the outlet.
为了电力、冶金、等行业发展需要，针对除灰渣及渣浆输送工况的特点，在几十年渣浆泵设计制造基础上，广泛吸取X技术和研制成果，我厂了我国一代大流量、高扬程、可多X串联的ZGB（P）系列渣浆泵。该系列产品的主要技术特点如下：采用现代CAD设计，水利性能X良，效率高和磨损率低；流道宽敞，抗堵塞性能好，汽蚀性能X越；采用付叶轮加填组合式密封和机械密封，确保渣浆无泄漏；可靠性设计，保证了整机平均无故障工作时间（MTBF）大幅度；采用稀油公制轴承，合理设置与冷却，保证轴承在低温下运行；过流部件采用特殊材质，耐磨损耐腐蚀性能好；经特殊处理，用于海水除灰及海水和盐雾电化学腐蚀工况；在允许的压力范围内可以多X串联使用，其允许工作压力为3.6Mpa；该系列渣浆泵产品具有结构合理、效率高、运行可靠和方便等X点，广泛适用于电力、冶金、矿山建材、化工等工业部门输送磨蚀性或腐蚀性渣浆，特别是电厂。
是集科研，出产和为一体的工业实体，具有雄厚的技术力气。公司于2001年8月通过认证，并于2009年顺畅完换版作业，并屡次被评为守合同重诺言单位，是河北省商标，河北省产品企业，公司于2010年缔造完善了新的厂区。其间各类高，中XX技术人员128名，具有各种出产设备200余台，固定资产9500万元，厂区面积9.5万平方米。是具有规划的大型水泵出产企业。公司现有员工439人坐落在我国石家庄河北会泉泵是要害出产工业泵的X厂家之筑面积7.6万平方米建立了完善的出产确保公司的产品有：脱硫泵国网动力，我国有色金属，华北油田，青海油田等的网络成员单位。会泉泵业以其X卓的许诺和，仰仗其活泼开拓进取。
