河北会泉泵业有限公司

五金通钻石会员 第13年
已通过企业工商认证
公司服务热线
13582138818
当前位置: 全球五金网 > 机电五金>>离心泵
会泉

莘县「渣浆泵批发」产品概述四

产品名称
会泉
价格
1500
在地区
河北 石家庄 
小起订量
1
供货能力
1000/天
发布时间
2019/3/22 7:06:06
信息来源
河北会泉泵业有限公司
温馨提醒:联系时请告诉我们您是在全球五金网看到的信息,会有优惠哦,谢谢!
更多采购需求,请发布采购需求或委托平台协助采购: 发布采购 | 委托采购
河北会泉泵业有限公司
联系人:
徐会泉 (销售经理)
手机:
13582138818
电话:
86-0312-3428054
主营
泥浆泵
潜污泵
污水泵
锅炉给水泵
氟塑料泵
IH化工泵
多级泵
IS单级离心泵
冷凝泵

最新产品

莘县「渣浆泵批发」产品概述四

The structure should also be improved, the parts should be made as far as possible to replace the parts, at the same time, in the structural design, should be better considered for the replacement of this item. Note that the selection of slurry pump materials on the choice of pump materials, in principle, the stronger the wear resistance, the better the material, but in the selection of wear-resistant materials, should also take into account economic and environmental protection and other factors, on the basis of comdivhensive consideration, the choice of wear-resistant materials, in addition to the use of wear-resistant materials, Can choose more wear-resistant materials, for not easy to wear place, wear resistance requirements can be reduced. In the wear resistance, mainly considering the shape of solid particles, as well as the acid and alkaline of liquids and concentrations, for those shapes are extremely irregular, should be used high hardness, good abrasion resistance of materials, such as hard nickel, ceramic coating, high chromium cast iron materials, in the process of material selection should be considered the main factor is the acid and alkaline of the mixture , hydrogen ions, or hydroxide ions.

一、ZJ渣浆泵概述

ZJ渣浆泵的形式分为两大类,一类是ZJ渣浆泵,为轴向单极单吸离心式渣浆泵;另一类是ZJL渣浆泵,为立式轴向单X单吸离心式渣浆泵。渣浆泵以其X的水力设计、结构设计达到了节能的显著效果,又以渣浆泵材质X良、硬度高、耐磨性好、运行平稳、加工工艺可靠等特点,深受用户X。渣浆泵技术可广泛应用于电力、冶金,煤炭、石油、化工、采矿、工业锅炉、河道疏通等X域。wjhuiquan3.21

莘县「渣浆泵批发」产品概述四

二、ZJ渣浆泵的用途和适用范围

渣浆泵系列在水力设计、结构设计以及所用耐磨材料上,综合应用了同类产品的X点并加以创新,具有节能、振动小、噪声低、运行可靠、使用寿命长、方便等特点,渣浆泵的综合性能居国内水平,大部分泵的效率指标居X水平。可广泛用于电力、冶金、煤炭、建材等行业输送含有固体颗粒的浆体。如火电厂水力除灰、冶金选矿厂矿浆输送、洗煤厂煤浆及重介输送等。其允许输送的浆体重量浓度Cw为:灰(渣)浆和煤浆45%;矿浆和重介60%。

莘县「渣浆泵批发」产品概述四

The center distance is small, you can use the ruler by the flat belt wheel end surface to find the positive. When the center distance is large, you can use the pull line to the flat belt end surface to find the positive, as shown in Figure 4. (3) Pump Import and export pipe segment configuration and Requirements ① pipeline diameter: pipe diameter should be the same as the inlet diameter of the pump or slightly larger than the pump inlet diameter, the principle is not only to oid the pump to produce citation, but also can not make the slurry in the pipeline to form sedimentation. Port Gate valve: In order to facilitate the maintenance of the pump, the port gate valve should be set, its diameter and pipe diameter is the same. A telescopic section should be arranged between the mouth and tube of the pump in order to disassemble the pump. ② discharge Pipeline Drain pipe diameter: discharge pipe diameter and slurry properties, settlement flow rate, in general, the discharge pipe diameter and pump outlet diameter is equal or slightly larger. Exit gate valve: Exit gate valve should be the same as the discharge pipe diameter. Pressure gauge: Located on a straight pipe section between the pump outlet and the first valve. ③ Pump pipeline configuration divcautions when using the valve to adjust the flow rate, the control valve should be located in the pump outlet, not allowed on the inlet pipe road with the valve adjustment.

三、从近几年来泵站的运行情况看,ZJ渣浆泵有以下X点:

1、ZJ渣浆泵效率高,节电效果明显。泵站运行电流平均下降30A,效率指标高出国内同类及国外相应泵2-10个百分点。

2、ZJ渣浆泵过流部件寿命长。一般能连续运行3000-4000小时,其寿命是12P-7型泵的5倍以上。

3、ZJ渣浆泵运行平稳、振动小、噪音低、了泵站的工作。

4、ZJ渣浆泵轴承箱结构合理,密封好,运行温度低。轴承使用寿命是12P-7型泵使用326轴承的9倍以上。

5、渣浆泵过流部件设计合理,拆卸方便。ZL型渣浆泵是节能降耗,效益的好产品,建议广泛推广。

同时在口处开设溢流装置,可以更好地起到排气作用。3)浇注前用热风机在200℃下进行烘烤1h,以防止砂型吸潮,树脂砂的发气量。在征得设计方同意的情况下,将口下方的圆角加大,改为R10mm,避免尖角砂的出现,有利于铸造缺陷隐患。生产验证对工艺进行改进后批量生产10件,经X声波检测,铸件内部组织致密,交付用户后经使用验证,未发生断裂问题,使用寿命在2500h左右,证明新工艺合理可行。渣浆泵叶轮怎么调解?为了保证渣浆泵运转,就必须及时渣浆泵叶轮与前护板的间隙,那么如何调节渣浆泵叶轮呢?金属内衬泵叶轮与前护板间隙在0.5-1mm之间,橡胶内衬泵叶轮与前后护套之间的间隙要相等。

莘县「渣浆泵批发」产品概述四

ZJ渣浆泵简介

泵体泵盖及过流部件:该系列泵为、垂直中形式、双泵壳结构渣浆泵。泵体和泵盖带有可更换的金属内衬,内衬材质为高铬耐磨合金材料,内衬可一直用到磨穿为止,周期,运行成本。泵的出口方向可按8个角度安装。

轴承组件:泵的轴承组件采用圆筒式结构,便于叶轮与前护板的间隙,时可整体拆出。轴承采用油脂。

轴封(密封):泵的轴封型式有填料密封、付叶轮密封、机械密封。

莘县「渣浆泵批发」产品概述四

The higher the water level, the lower the rotational speed; the lower the water level, the higher the rotational speed. At the same time, the water level signal is transmitted to the control cabinet, so that the operator can understand the level status in a timely manner. This control keeps the circulation in the slurry pool basically unchanged. In order to ensure the efficient operation of the liquid slurry pump, the gap between the impeller and the front guard plate must be adjusted regularly so that it remains between (0.75-1mm). Pump in operation in addition to monitoring the flow, divssure, but also to monitor the motor do not exceed the rated current of the motor. At any time oil seals, bearings, such as whether there is a guide phenomenon, whether the pump occurred emptying or overflow pool, etc., and at any time to deal with. The pump body (cannot) bear the divssure from the outlet piping system, the warehouse spare pump should rotate (1/4) circle every week, so that the shaft can withstand the load and external vibration evenly, belt CR drive for the pump from the inlet to see the motor on the pump (right) side. The slurry pump mainly aims at conveying flow rate. Therefore, in the operation of the monitoring system as far as possible to install the flow meter (meter), at any time to monitor whether the traffic meets the requirements;

莘县「渣浆泵批发」产品概述四

ZJ渣浆特点和用途:

随着杂质泵技术的发展和完善,我公司结合用户反馈,利用现代流体力学的理论,现代机械理论,电脑设计技术;我公司推出了ZJ系列渣浆泵,该系列渣浆泵具有型号全、性能,覆盖工况广、选型方便等特点

信任凭仗咱们X质的产品,完善的效劳,X的诺言。用户是榜X必定会赢得越来越多用户的亲睐。诚信守约”是企业的主旨。用户的是咱们的终政策。咱们将以簇新的形象。河北会泉泵业有限公司产品是您佳挑选,咱们以X异的产量,X的效劳与您共创光辉明日。河北会泉泵业有限公司是等产品X出产加工的公司,具有完好,科学的办理体系。河北会泉泵业有限公司的诚信,实力和产量取得业界的认可。欢迎各界朋友莅临观赏,辅导和事务洽谈。更X发挥环保的先导,倒逼,功能,生态文明建设水平。保护应该成为深化改革的重点X域和突破口。当前广东省粗放型的经济增长尚未完全转变。生态资源约束日益趋紧。
  • 主题:
  • 联系人:
  • 公司名称:
  • 手机号码:
  • 邮箱:
  • 询盘内容:
  •   提交询盘
同类产品推荐

相关产品

河北会泉泵业有限公司 [企业产品地图]

主营: 泥浆泵潜污泵污水泵锅炉给水泵氟塑料泵IH化工泵多级泵IS单级离心泵冷凝泵
关于我们 | “五金通”会员 | 加入厂销通 | 成功案例 | 友情链接 | 免责声明 | 联系我们
本站技术支持和推广服务由全球五金网提供 咨询电话:400 617 1006
全球五金网 版权所有 ICP证:浙B2-20100360
免费 发布产品供应和采购需求,即时获取行业 生意机会 发布采购 发布产品供应