带式污泥脱水机泥浆泵@邯郸带式污泥脱水机泥浆泵100ZJW-II
First to check the appearance of the impeller, whether flat, whether there are sand eyes, cracks, etc., to ensure that the new impeller has no quality problems. Secondly, the dynamic balance experiment should be carried out to ensure that the impeller is replaced without rendering deflection, and the pump will not show vibration severity. Because customers generally will not be equipped with professional experimental equipment, so ding thousand pump industry impeller accessories in the factory has now done a balanced experiment to ensure that customers can be installed after the normal operation. Replace the impeller first to remove the pump and remove the damaged old impeller. One thing to keep in mind here is that the filter pump impeller is fixed on the pump shaft to select the reverse wire, that is, the direction of rolling the pump is the opposite, such a benefit is the more and more tight. After the new impeller is bought to disassemble and the equipment impeller time must be in the correct direction of operation.
我公司生产的ZJE型压滤机入料泵是由我公司与江苏理工大学流体机械研究所结合各压滤机使用的入料工况,设计的压滤机X入料泵产品。wjhuiquan3.19
1,SMP体系:固体废弃物经撕碎机破碎后和液态危废(油泥渣,油漆泥渣,化工危废等)拌和混合后由单缸柱塞泵(单剪切阀,冲剪头)运送进固废炉,反转窑炉。2,危废料仓接纳罐车运来的危废,由危废料仓下面的危废运送柱塞泵直接运送到固废炉,反转窑炉。
经过各种洗煤、环保、铝厂、冶炼等,其性能已达到国内水平,一经投放市场,其压滤效果、滤干时间、污水污物的防堵性、无泄漏及整机的性均深受用户好评。为各类用户生产环节提益起到了积极的促进作用。
ZJW型压滤机入料泵采用X特的水力设计及叶轮安装,确保了其性能曲线比一般杂质泵更陡,非常适合压滤机入料时应阻力的变化来实现大流量,低压力喂料与小流量,高压力过滤的目的。其特殊的水力性能恰好吻合压滤机由空腔到填满再到滤干的渐进。喂料初期不用阀门控制流量过大引起的电机过载同时低压力不会对滤板边框产生冲击,减轻了滤板边框上的滤布的破损,也不会冲击滤板造成震动,压滤后期的小流量大压力不易产生憋泵。尤其是在后期压榨期时同泵在大压力下其X特的叶轮安装及副叶轮的作用,保证轴封处的基本达到无泄漏。
带式污泥脱水机泥浆泵@邯郸带式污泥脱水机泥浆泵100ZJW-II
4, the device to disassemble the ring, to tighten the water tray, 5, the rotor fixed on the bracket, the shaft on the magnetic percentile table, monitoring the bracket and the rear pump shell joint positioning hole machine end and shaft rotation center of the same axis and straightness, can not be greater than. Filter divss Feed pump disassembly East and West magnetic percentile pump head part of the device 1, filter divss feed pump rear pump shell mounted on the bracket at one end of the semicircle end surface.
●性能参数:
型号 | 转 速 (r/min) | 流 量 (m3/h) | 扬 程 (m) | 轴功率 (k/h) | 选配电机 功率(kw) |
65ZJW-III | 1480 | 27.5 41.4 55.2 69.0 80.0 | 76.0 72.2 66.1 56.0 43.5 | 22.3 | Y225S-4 30KW |
Y225S-4 37KW | |||||
80ZJW-III | 1480 | 40.0 60.0 80.0 100 115 | 76.0 72.2 66.1 56.0 43.5 | 32 | Y225S-4 37KW |
Y225M-4 45KW | |||||
100ZJW-III | 1480 | 56.0 85.0 113 150 169 | 73.3 69.0 62.5 51.2 44.0 | 49 | Y225M-4 45KW |
Y250M-4 55KW | |||||
125ZJW-III | 1480 | 70.0 105 140 186 245 | 73.5 71.6 68.6 61.9 48.5 | 62.5 | Y250M-4 55KW |
Y280S-4 75KW | |||||
125ZJW-III | 1480 | 79.7 119 159 211 279 | 80.0 78.0 74.8 67.5 52.9 | 78.2 | Y280S-4 75KW |
Y280M-4 90KW | |||||
125ZJW-III | 1480 | 58.0 87.0 116 154 203 | 91.8 89.1 85.7 77.3 60.6 | 64.7 | Y280S-4 75KW |
Y280M-4 90KW |
创建于1999年元月,注册资金1000万元,45000平方米,厂房面积20000平方米。互利双赢我们愿与顾客精诚合作紧邻322省道,交通十分便利。共谋发展。期待您的光临与惠顾!河北会泉泵业有限公司位于河北经济区。