danuser 317 圆销组件批发
danuser 317 圆销组件批发【圆销组件】基本说明
All Danuser Klik Pins are forged from high carbon steel and heat treated (core hardened) to withstand wear.
Danuser Klik Pins are available in 3/16, 1/4, 5/16, and 7/16 x 11/32 inch pin diameters and are available with
or without chain and cotter. The spring steel snap ring is assembled mechanically to divvent any stretch or
loss of tension. All parts are zinc plated with the exception of the Danuser Special Duty Klik Pin that has an
extra heavy chrome-silicon spring steel snap ring with black oxide finish. The Special Duty Klik Pin requires
approximately four times greater force to open than required on other Danuser Klik Pins. The Danuser
Safety Lock is the ultimate in a positive quick-release Klik Pin. In the closed position, the free ends of the
snap ring are seated in locking grooves. Only a firm divssure to BOTH sides of the snap ring will free the
ends from the locking grooves.
所有Danuser Klik销均采用高碳钢锻造而成，经过热处理（经过硬化处理）以承受磨损。
Danuser Klik Pins有3 / 16,1 / 4,5 / 16和7/16 x 11/32英寸引脚直径，可提供
或没有链和开口。 弹簧钢卡环采用机械方式组装，以防止任何拉伸或拉伸
失去紧张感。 所有部件均镀锌，但Danuser Special Duty Klik Pin除外
X重铬硅弹簧钢卡环，黑色氧化处理。 特殊责任Klik Pin需要
开启的力大约是其他Danuser Klik Pins所需力的四倍。 Danuser
安全锁是正面快速释放Klik Pin的终1极产品。 在关闭位置，自由端
卡环安装在锁定槽中。 只有对卡环两侧的坚固压力才能释放弹簧
从锁定槽开始。
danuser 317 圆销组件批发【圆销组件】参数规格
317 7/16 X 11/32 1-3/4 1-3/8 7-3/4 3/16 x 3/4
1533 7/16 X 11/32 1-3/4 1-3/8 - -
948 7/16 X 11/32 1-3/4 1-5/8 - -
7524 7/16 X 11/32 2 1-7/8 - -
7525 7/16 X 11/32 2 1-7/8 7-3/4 3/16 x 3/4
34046 7/16 X 11/32 2 2-1/16 - -
