北京蓝翔恒达焊材有限公司
五金通金牌会员 第15年
已通过企业工商认证
公司服务热线
15901248886
德国卡博CARBO7W模具焊条 堆焊焊条报价
CARBO 2M铸铁型面堆焊使用
特 性 | 可直接在铸铁上施焊,对于抗冷冲压的金属间磨耗非常X.焊金层为奥氏体组织,从X二层开始为马氏体组织抗磨耗性好. Can directly in the iron welding process, to make cold stamping metal abrasion very effective. Welding between the first layer of gold for austenitic group, second start martensite organization for good abrasion resistanceHRC46~52 |
用 途 | 球墨铸铁,火焰淬火铸铁,合金铸铁的直接堆焊. Ductile iron, flame hardening, alloy iron direct hardfacing. |
规 格 | 2.6￠ 3.2￠ 4.0￠ 5.0￠ |
特 性 | 可直接在铸铁上施焊,对于抗冷冲压的金属间磨耗非常X.焊金层为奥氏体组织,从X二层开始为马氏体组织,抗磨耗冲压性能X良. Can directly in the iron welding process, to make cold stamping metal abrasion very effective. Welding between the first layer of gold for austenitic group, second began to martensitic organization, abrasion resistance stamping excellent performance |
用 途 | 主要用于各种淬火后铸铁的刃口修补焊接. Mainly used for various hardened iron blade repair welding. |
规 格 | 2.6￠ 3.2￠ 4.0￠ 5.0￠ |
特 性 | 有良好的抗拉强度和延伸率 硬度HB-160. Have good tensile strength and elongation hardness HB - 160. |
用 途 | 用于各种铸铁 合金铸铁 钢与铸钢的焊接. For all kinds of iron alloy steel and cast iron welding. |
规 格 | 2.6￠ 3.2￠ 4.0￠ 5.0￠ |
特 性 | 用于不同铸铁焊接时焊层能要求的满足其颜色匹配,抗拉强度和延展性X良. Used for welding of different iron welding layer can satisfy the requirements of color matching, tensile strength and ductility. |
用 途 | 焊补灰口铸铁,球墨铸铁. Weld-repair grey cast iron, ductile iron |
规 格 | 2.6￠ 3.2￠ 4.0￠ 5.0￠ |
特 性 | 高铬成份,焊金具有高拉力,高韧性 HB-280. High chrome component, high strength, welding gold high toughness HB - 280. |
用 途 | 铸钢模硬面制做打底缓冲层,裂缝敏感度较高的特种钢接合衬焊使用. Cast steel hardfaced making render buffer layer, crack sensitive use of special steel lining welding joints. |
规 格 | 2.6￠ 3.2￠ |
特 性 | 对冲压模的金属磨耗非常X,焊金次为奥氏体组织,X二层为高硬度的马氏体组织.火焰淬火钢也可以直接堆焊. The metal stamping mould for abrasion is very effective for the first time, welding gold austenitic organization, the second is the high hardness martensite steel quenching. Flame may also directly hardfacing. |
用 途 | 直接堆焊各种铸铁材的模具. All sorts of cast iron material directly surfacing of mould. |
规 格 | 2.6￠ 3.2￠ 4.0￠ 5.0￠ |
特 性 | 耐冲击与金属间磨耗,直接焊于热处理后的Cr12MoV钢上,可全位置焊接,硬度HRC52~57. Impact resistance and metal abrasion, directly welded to the Cr12MoV after heat treatment, but the POSTTTION on the steel welding, hardness HRC52-57 |
用 途 | 汽车大型模具硬面制做,冷冲模刀口焊接Auto giant mould making, cold die cutting hardfaced welding. |
规 格 | 2.6￠ 3.2￠ |
特 性 | 熔敷金属具有高硬度的马氏体组织,耐磨耗耐冲击性能X良,硬度HRC55~58. Deposited metal of martensite with high hardness, good abrasion resistance, impact resistant performance of hardness HRC55 ~ 58. |
用 途 | 切模,冲压模具的刃口焊材,也可以在碳钢上堆焊制成新工具. Cutting, welding blade of stamping mould, also can be made in the new tool steel #. |
规 格 | 2.6￠ 3.2￠ 4.0￠ |
特 性 | 高铬成份,耐磨耗耐龟裂性能X良,焊后硬度较高,机械加工困难. High chrome component, abrasion resistance, resistance to crack excellent performance after welding, machining difficulty high hardness. |
用 途 | 淬火硬化模具钢刃口的修补,适用于SKD11合金工具钢,淬火后的模具钢修补. Quench hardened steel blade of repair, applicable to SKD11 alloy steel, alloy after quenching repair. |
规 格 | 2.6￠ 3.2￠ 4.0￠ |
特 性 | Cr Mo W V多元合金钢耐磨堆焊材料,通过热处理可调整堆焊金属的硬度,耐热到550℃. Cr Mo w. v. multivariate alloy wear-resistant overlaying welding materials, heat treatment can be adjusted by the hardness and resistance buttering metal 550 degrees Celsius. |
用 途 | 用于堆焊冷作热作工具,模具.如压铸模具,锻造工具 热修整工具和冷切刀,可堆焊在低合金钢上制成工具. Used for surfacing cold ReZuo tool, die casting die forging. Such as heat, cold and tool grinding tools, cutting knife can be made in the low alloy steel # tools. |
规 格 | 2.6￠ 3.2￠ 4.0￠ |
特 性 | 中硬度钢焊条HRC45~48 Hardness steel electrode in HRC45 ~ 48 |
用 途 | 适用于汽车模具,热坯模,铸钢模耐中高温冲击磨耗之机件延压部分的修补,焊层可加工. Applicable to auto mould casting mould casting, heat resistant steel, high impact abrasion of the drawing and divssing machine, welding parts repair coating can be processed. |
规 格 | 2.6￠ 3.2￠ 4.0￠ |
特 性 | 高度耐热耐磨耗,540℃高温依然可保持52~54HRC. High abrasion resistance, heat 1,000-degree still can keep 54HRC - 52. |
用 途 | 用于耐热耐磨耗硬度要求很高的锻模或锤锻模刃口修复.更适用于H13等热作模具局部和型腔修复. For high hardness resistant abrasion resistance of blade forging hammer forging or repair H13 etc. More suitable for ReZuo mold cavity and local repair. |
规 格 | 2.6￠ 3.2￠ 4.0￠ |
特 性 | 熔敷金属为低碳合金 含Ni Cr Mo V 极具韧性,含Mo V 所以回火时抗软化,反复冷却加热也能保持良好的耐热性能. For low carbon deposited metal alloys containing Ni Cr Mo V extremely toughness, including Mo V so when the tempering softening, cooling heating can keep good heat resistance. |
用 途 | 热作锻造模的修补,要求在500℃耐热耐冲击耐金属间磨耗部分的堆焊. ReZuo forging repair, requirements of 500 degrees in heat resistant to abrasion resistance to impact between metal parts of the hardfacing. |
规 格 | 2.6￠ 3.2￠ 4.0￠ |
特 性 | 专为修补困难的淬火硬化型模具钢和修补硬化堆焊缺损部分的焊接而开发设计的钛钙性焊条,不须要高温预热即可堆焊. Designed for repairing difficult quench hardened steel type and repair the defect of hardening surfacing welding and part of the design and development of titanium rod, dont need calcium temperature divheating can hardfacing. |
用 途 | 焊补冲压模 锻造模 工具钢等淬火硬化后模具材料的修补. Progressive metal stamping mould forging weld-repair after quench hardened steel mold materials etc. |
规 格 | 2.6￠ 3.2￠ 4.0￠ |
