上海宝冶工程技术有限公司
普通会员 第14年
未通过企业工商认证
公司服务热线
13524604934
各种标准的焊接工艺评定
Welding Procedure Qualification on Different Standards
焊接工艺评定是为验证所拟定的焊件焊接工艺的正确性而进行的试验过程和结果评价。
Welding procedure qualification is the experimental process and result evaluation which carries out for Verifying the correctness of welding piece’s drafted welding procedure.
上海市焊接学会可以根据客户的要求，进行多种标准的焊接工艺评定，包括国内相关标准和欧洲标准ISO标准、AWS标准、ASME标准和其它客户要求的相应X和组织标准。
SWS can go on welding procedure qualification according to many standards, which include national standards, European ISO standards, AWS standards, ASME standards and other standards of relevant countries and organizations clients designated, according to the clients’ requirements.
评定标准 Qualification Standard：
国内部分 Domestic Standards：
JB/T4708－2000《钢制压力容器焊接工艺评定》
JB/T4708 - 2000《Welding procedure qualification for steel pressure vessels》
JB/T4745 - 2002《钛制压力容器焊接工艺评定》
JB/T4745 - 2002《Welding procedure qualification for titanium pressure vessels》
JB/T4734 - 2002《铝制压力容器焊接工艺评定》
JB/T4734 - 2002《Welding procedure qualification for aluminum pressure vessels》
GB50236－98《现场设备，工业管道焊接工程施工及压力管道工艺评定》
GB50236 - 98《Code for construction and acceptance of field equipment, industrial pipe welding engineering》
《蒸汽锅炉安全技术监察规程（1996）》注：起重行业工艺评定借用此标准
《Safety-supervision regulation for steam boiler(1996)》note: The welding procedure of the cranes referred to this specification
欧洲标准 European standards：
欧洲标准 EN288（ISO15614）
ISO15614-1 金属材料焊接工艺规程及评定--焊接工艺评定试验，X一部分：钢的电弧焊和气焊∕镍和镍合金的电弧焊（相当于EN288-3）
ISO15614-1 Specification and qualification of welding procedures for metallic material-Welding procedure test-Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys（equivalent to EN288-3）
ISO15614-2 金属材料焊接工艺规程及评定--焊接工艺评定试验，X二部分：铝和铝合金的电弧焊（相当于
EN288－4）
ISO15614-2 Specification and qualification of welding procedures for metallic material-Welding procedure test-Part 2: Arc welding of aluminum and its alloys（equivalent to EN288-4）
ISO15614-3 金属材料焊接工艺规程及评定--焊接工艺评定试验，X三部分：铸铁电弧焊
ISO15614-3 Specification and qualification of welding procedures for metallic material-Welding procedure test-Part 3: Arc welding of cast irons
ISO15614-4 金属材料焊接工艺规程及评定--焊接工艺评定试验，X四部分：铸铝的修补焊
ISO15614-4 Specification and qualification of welding procedures for metallic material-Welding procedure test-Part 4: Arc welding of aluminum castings
ISO15614-5 金属材料焊接工艺规程及评定--焊接工艺评定试验，X五部分：钛和钛合金的电弧焊∕锆和锆合金的电弧焊
ISO15614-5 Specification and qualification of welding procedures for metallic material-Welding procedure test-Part 5: Arc welding of titanium, zirconium and their alloys
ISO15614-6 金属材料焊接工艺规程及评定--焊接工艺评定试验，X六部分：铜和铜合金的电弧焊
ISO15614-6 Specification and qualification of welding procedures for metallic material-Welding procedure test-Part 6: Arc welding of copper and copper alloys
ISO15614-7 金属材料焊接工艺规程及评定--焊接工艺评定试验，X七部分：堆焊
ISO15614-7 Specification and qualification of welding procedures for metallic material-Welding procedure test-Part 7: Corrosion resistant overlay, cladding restore and hardfacing
ISO15614-8 金属材料焊接工艺规程及评定--焊接工艺评定试验，X八部分：管接头和管板接头的焊接
ISO15614-8 Specification and qualification of welding procedures for metallic material-Welding procedure test-Part 8: Welding of tubes to tube-plate joints
ISO15614-12金属材料焊接工艺规程及评定--焊接工艺评定试验，X十二部分：点焊、缝焊及凸焊
ISO15614-12 Specification and qualification of welding procedures for metallic material-Welding procedure test-Part 12: Spot, seam and projection welding
DIN18800 - 钢结构焊接规范
DIN18800 - Steel structures
美国标准 American Standards：
AWS
AWS D1.1/D1.1M:2010 | 钢结构焊接规范 |
AWS D1.1/D1.1M:2010 | Structural Welding Code-Steel |
AWS D1.2/D1.2M:2008 | 铝结构焊接规范 |
AWS D1.2/D1.2M:2008 | Structural Welding Code-Aluminum |
AWS D1.3/D1.3M:2008 | 薄板钢结构焊接规范 |
AWS D1.3/D1.3M:2008 | Structural Welding Code-Sheet Steel |
AWS D1.5/D1.5M:2010 | 桥梁焊接规范 |
AWS D1.5/D1.5M:2010 | Bridge Welding Code |
AWS D1.6/D1.6M:2007 | 不锈钢结构焊接规范 |
AWS D1.6/D1.6M:2007 | Structural Welding Code-Stainless Steel |
AWS D8.1M:2007 | 汽车焊接质量规范—钢电阻点焊 |
AWS D8.1M:2007 | Specification for Automotive Weld Quality-Resistance Spot Welding of Steel |
AWS D9.1/D9.1M:2006 | 薄壁金属焊接规范 |
AWS D9.1/D9.1M:2006 | Sheet Metal Welding Code |
AWS D14.1/D14.1M:2005 | 工业和工厂用起重设备和其它物料搬运设备焊接技术条件 |
AWS D14.1/D14.1M:2005 | Specification for Welding of Industrial and Mill Cranes |
AWS D14.3/D14.3M:2005 | 挖掘机，建筑和农业设备的焊接技术条件 |
AWS D14.3/D14.3M:2005 | Specification for Welding Earthmoving, Construction |
AWS D15.1/D15.1M:2007 | 铁路机车车辆焊接规范 |
AWS D15.1/D15.1M:2007 | Railroad Welding Specification for Cars and Locomotives |
AWS D17.1/D17.1M:2001 | 航空熔化焊接规范 |
AWS D17.1/D17.1M:2001 | Specification for Fusion Welding for Aerospace Applications |
AWS D17.2/D17.1M:2007 | 航空电阻焊接规范 |
AWS D17.2/D17.1M:2007 | Specification for Resistance Welding for Aerospace Applications |
AWS B2.2/B2.2M:2010 | 硬钎焊工艺及技能评定规范 |
AWS B2.2/B2.2M:2010 | Specification for Brazing Procedure and Performance Qualification |
AWS B2.3/B2.3M:2008 | 软钎焊工艺及技能评定规范 |
AWS B2.3/B2.3M:2008 | Specification for Soldering Procedure and Performance Qualification |
ASME
ASME锅炉及压力容器规范 X九卷（Ⅸ）焊接和钎焊工艺评定，焊工和钎焊工技能评定
ASME Boiler and Pressure Vessel Code IX Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding and Brazing Operators
焊接式冶炼渣罐制造http://www.cnjmzb.com/qizhongshebei/109.html
大型机电设备外壳制造http://www.cnjmzb.com/jidianshebei/116.html
起重机设备制造：http://www.cnjmzb.com/qizhongshebei/103.html
上海宝冶工程技术有限公司
联系人：戴新坡
手机：13524604934
电话：021-56935011 56935006
邮箱：dxp@etc-sbc.com
传真：021-56925012
客服：400-118-7988
网址www.cnjmzp.com
上海市宝山区四元路168号4号楼（200941）
