上海恒朵仪器科技有限公司
五金通钻石会员 第16年
已通过企业工商认证
公司服务热线
18217777117
等X试验粉尘及特殊定制粉尘分布的X制造商和经销商。具体请阅读：“试验粉尘的历史”来了解PTI在生产ISO12103-1标准中规定的4个等X试验粉尘的角色。X的工程技术，良好的发展状态，保密产权程序的实施，彻底的分析调查及每个阶段材料处理的评估都让PTI对其客户无论从竞争者或增值服务都脱颖而出。
典型的化学成分分析
| 化学成分 | 重量百分比 | 化学成分 | 重量百分比 |
| Si02 | 68 - 76 | Ca0 | 2.0 - 5.0 |
| Al203 | 10 - 15 | Mg0 | 1.0 - 2.0 |
| Fe203 | 2 - 5 | Ti02 | 0.5 - 1.0 |
| Na20 | 2 - 4 | K20 | 2.0 - 5.0 |
*Loss on Ignition 2 – 5%
ISO
试验粉尘颗粒分布(体积百分比小于)
| 尺寸(微米) | ISO 12103-1, A1 X细试验粉尘 |
| 1 | 1.0 – 3.0 |
| 2 | 9.0 – 13.0 |
| 3 | 21.0 – 27.0 |
| 4 | 36.0 – 44.0 |
| 5 | 56.0 – 64.0 |
| 7 | 83.0 – 88.0 |
| 10 | 97.0 – 100 |
| 20 | 100 |
| 40 | -- |
| 80 | -- |
| 120 | -- |
Filtration Standards, & Specifications | Contaminants Required | Comments & Information |
| ANSI B93.31: Multipass Method for Evaluating the Filtration Performance of a Fine Hydraulic Fluid Power Element | ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete) | B93.31: Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the ANSI B93.31 & NFPA T3.10.8.8 documents |
| ISO 4020: Road Vehicles - Fuel Filters for Diesel Engines | ISO 12103-2, M1 and M2 Aluminum Oxide Test Dusts | An Organic Contaminant is also required, see 4020 standard for details. |
| ISO 4548-4: Initial Particle Retention Efficiency, Life & Cumulative Efficiency (gravimetric method) | ISO 12103-1,A2 Fine Test Dust ISO 12103-2, M2, M3, M4 and M5 Aluminum Oxide Test Dust | Life & Cumulative Efficiency uses A2 Fine Test Dust Initial Particle Retention uses M series of Aluminum Oxide Test Dust |
| ISO 4548-12: Filtration Efficiency using Particle Counting, & Contaminant Retention Capacity | ISO 12103-1, A3 Medium Test Dust | SAE J 1858 Oil Filter Multipass Method is cancelled. ISO 4548-12 has been adopted by SAE |
| ISO 4572: Hydraulic Fluid Power- Filters - Multipass Method | ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per std. is obsolete) | SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE |
| ISO/TS 11155-1: Road Vehicles - Air Filters for Passenger Compartments Part 1: Test for Particulate Filtration | ISO 12103-1, A2 Fine Test Dust | SAE J 1669-1: Cabin Particulate cancelled. ISO/TS 11155-1 has been adopted by SAE |
| ISO/TS 13353: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Initial Efficiency by Particle Counting | ISO 12103-1, A3 Medium Test Dust | ISO/TS 13353 is cancelled & withdrawn. ISO 19438 has replaced 13353 |
| ISO 16889: Hydraulic Fluid Power Filters - Multipass Method for Evaluating Filtration Performance of a Filter Element. | ISO 12103-1, A3 Medium Test Dust | ISO 16889 has replaced 4572 Hydraulic Filter Multipass Test Method |
| ISO 19438: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Filtration Efficiency using Particle Counting & Contaminant Retention Capacity | ISO 12103-1, A3 Medium Test Dust | ISO 19438 has replaced 13353 Fuel Filter Initial Efficiency |
| ISO/CD19713: Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors -Fractional Efficiency Testing | ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust | This Standard is under development by ISO/TC22/SC7/WG3 Air & Oil Filters |
| JIS D1608: Fuel Filter Test Method for Automotive Gasoline Engines | JIS Z 8901, Class 8 (fine) Test Dust | ISO 12103-1, A2 Fine Test Dust may be substituted if listed in test report and/or with customer agreement |
| JIS D1611: Automotive Parts - Test Methods of Lubricating Oil Filters | SOFTC-2A | Gravimetric Test Method |
| JIS D1617: Automotive Parts - Fuel Filters for Diesel Engines Test Methods | An Organic Contaminant is also required, see D1617 standard for detail. ISO 12103-2 Aluminum Oxide Test Dusts JIS Z 8901 Class 8 (fine) Test Dust | ISO 12103-1, A2 Fine Test Dust may be substituted for JIS Z 8901 Class 8 Test Dust if listed in test report and/or with customer agreement |
| NFPA T3.10.8.8: Hydraulic Fluid Power-Filters - Multipass Method for Evaluating Filtration Performance | ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete) | T3.10.8.8 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the NFPA & ANSI B93.31 documents |
| SAE J 726: Air Cleaner Test Code | ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust | SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE |
| SAE HS- 806: Oil Filter Test Procedure Section 6: Filter Capacity & Contaminant Removal Characteristics of Full-Flow Oil Filters | ISO 12103-1, A2 Fine Test Dust SOFTC 2A | Gravimetric Test Method for Overall Efficiency & Capacity |
| SAE HS- 806: Oil Filter Test Procedure Section 7: Single Pass Particle Retention Capability Test | Broad Range within 29-470 μm of glass beads Narrow Range in 10 μm fractions of glass beads Natural ISO 12103-1, A4 Coarse Test Dust in full range or fractions thereof | Gravimetric Test Method for Single Pass Efficiency |
| SAE J 905: Fuel Filter Test Methods | ISO 12103-1, A2 Fine Test Dust | Gravimetric Test Method for Efficiency & Capacity |
| SAE J 1669-1: Passenger Compartment Air Filter Test Code - Particulate Filtration | ISO 12103-1, A2 Fine Test Dust | SAE J 1669-1 is cancelled. ISO 11155-1 has been adopted by SAE |
| SAE J 1858: Full-Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance | ISO 12103-1, A3 Medium Test Dust | SAE J 1858 is cancelled. ISO 4548-12 has been adopted by SAE |
| SAE J 1985: Fuel Filters - Initial Single Pass Efficiency Test Method | ISO 12103-1, A2 Fine Test Dust | Particle Counting Fuel Filter Test Method- Fractional Efficiency |
